Thema: Fehlermeldung 51.01 & 52.01 tritt immer wieder auf
Schreibdatum: 08.05.2008 um 15:26 Uhr
Nachricht:
Hier noch ein Auszug:
51.x ERROR CYCLE POWER
Control Panel Message
51.x ERROR CYCLE POWER
Event Log Error
Service Message 51.01.00
A laser subsystem problem exists.
x = 1: Beam detect malfunction
x = 2: Laser malfunction
Required Action
Press SELECT to resume operation.
NOTE: If the printer is set to AUTO CONTINUE=ON, the printer will automatically continue printing when this error occurs.
If error persists, reseat or replace cables from the DC Controller to the Laser/Scanner Assembly.
52.x ERROR CYCLE POWER
Control Panel Message
52.x ERROR CYCLE POWER
Event Log Error
Service Message 52.01.00, 52.02.00
A scanner subsystem problem exists.
x = 1: Scanner start-up failure
x = 2: Scanner rotation failure
Required Action
Turn off the printer and then turn it on again.
If the error continues, reseat or replace cables from the DC Controller to the Laser/Scanner Assembly.
|
|
